REMOTE CONTROL FOR TREE CUTTING WITH DISPLAY

Remote control equipped with a practical color display which shows all boom geometric data to the user on the ground, increasing operator’s safety.

In addition to the remote control with display, you will be able to perform all the functions of the tree cutting attachment (ATT-08-001). The attachment is not included in the code.

You will also be able to visualize the machine’s main parameters and confirm the attachment pairing without having to enter the cab.

If the machine is equipped with the Pre arrangement for Remote drive (OPT-02-012), this remote control will allow  to stabilize and drive the telehandler remotely.

In countries where the regulations require it, the Remote Control for tree cutting with display and consent button (OPT-02-040) will be needed.

Operations with the remote:

• machine start/stop
• turret rotation
• boom out/in
• boom up/down
• hare/turtle mode
• emergency pump
• increase/decrease RPM
• emergency stop
• control for valves at boom head
• boom out mode M1 and M2 (only RHT6.46)
• remote drive
• Stabilizers up/down (automatic stabilizing and levelling)
• machine movement forward/backward
• machine movement left/right
• 6 programmable keys for additional functions
• dedicated joystick for tree cutting
• grab rotation (vertical axix)
• close/open grab
• saw on/off operation

Information available on the remote:

• remote control battery level
• indicator for machine pairing
• Indicator for % of anti tilting system
• indicator of activation of the valve at the boom’s head
• attachment confirmation from remote
• machine status (alarms/engine etc. same as page 1 on display)
• info on load status (boom position, angle, maximum load, actual load Kg)

This optional is suitable for RTH range.